Hilti TE3000-AVR Breaker

Hilti TE3000-AVR

The Hilti TE 3000 AVR Heavy Duty Breaker brings impressive hammering power to big concrete demolition jobs.

This breaker is very versatile and can be used for breaking up concrete and asphalt for road building, repair work and pipe laying.

This breaker does not need a compressor, is very easy to transport and is ready for use in minutes.

  • Impressive hammering impact energy of 68 joules for rapid progress in big concrete demolition jobs
  • Exceptionally high breaking performance – up to 6 tons of concrete per hour, which puts the TE 3000 on a par with air/compressor tools
  • Active Vibration Reduction (AVR) makes the tool less tiring to use and increases daily productivity
  • Versatile, easy to operate, easy to transport and ready for use in minutes
  • Needs no compressor and therefore easier to transport than air tools, highly versatile and ready for use in minutes
  • Single impact energy: 68 J
  • Triaxial vibration for chiselling in concrete: 7 m/s² 1
  • Weight according to EPTA Procedure 01/2003: 29.9 kg
  • Active Vibration Reduction: Yes
  • Brushless motor: Yes
  • Full hammering frequency: 860 impacts/minute
  • A-weighted emission sound pressure level: 94 dB (A) 2
  • Reduced impact energy: No
  • Supply cord length: 5 m
  • chiselling performance: 40000 cm³/min
  • Dust removal module: No
  • Control switch lock: No
  • Service indicator: Yes
  • Variable speed switch: No
  • Constant speed motor electronics: Yes
  • Interference immunity: Yes
  • Weight class: 30 kg
  • Dimensions (LxWxH): 808 x 610 x 209 mm
  • Needle adapter: No
  • IP protection class: IP 20 (IEC 60529)
  • On/off switch: Yes
  • Working direction: Floor demolition
  • A-weighted emission sound power level: 105 dB (A) 3

1) according to EN 60745-2-6

2) according to EN 60745

3) according to EN 60745